Assessor Property Record Search Outage

Assessor's property record search will be down 5 p.m. Oct. 20 until 8 a.m. Oct. 23.

The Assessor's Office property record search application will be unavailable from 5 p.m. Friday, Oct. 20 until approximately 8 a.m. on Monday, Oct. 23. This outage is to allow for system maintenance.

We apologize for any inconvenience the outage may cause.  

Building

Contact Us

  • Phone: 970-328-8730
    Fax: 970-328-7185
    Inspection Line
    1-866-701-3307

    Building
    P.O. Box 179
    500 Broadway
    Eagle, Colorado 81631 

    comdev@eaglecounty.us 



FAQ

Selecting the desired question will link you to the corresponding answer (or scroll down to view all frequently asked questions and answers).

1. How many sets of plans do I submit?

2. Must plan drawings be submitted on particular sized paper?

3. Do plans require an architect/engineer wet stamp?

4. What codes are in effect?

5. What is the equation for calculating snow loads in Eagle County?

6. How do I determine the site specific elevation of a building site?

7. What is the wind design for Eagle County?

8. What is the seismic zone for Eagle County?

9. What is the frost depth in Eagle County?

10. What local amendments are in effect?

11. To whom should checks be made payable?

12. Where can I buy code books? 

13. Can I download code books from the county website?

14. Can I apply for a permit online?

15. Can I submit an application through the mail?

16. Does unincorporated Eagle County have a use tax?

17. Do you perform building inspections for incorporated towns in Eagle County?

18. Do you process permit applications for the incorporated towns in Eagle County?

19. Do I need to be registered or licensed with Eagle County?

20. Who handles electrical inspections in El Jebel?

21. Do I need a permit for an agricultural building?

22. What days do you inspect in El Jebel?

23. What's my tax parcel number?

24. Who do I speak to about work being done without a permit?

25. What's the zoning for my property?

26. What's the allowable building height for my property? 

27. What number do I call to schedule inspections?

28. What's the routing cut-off time for requesting an inspection?

29. What's the allowable floor area ratio, lot coverage and impervious coverage for my property?

30. What are your office hours?

31. What is the adopted code for building stairs?

32. How is building permit valuation defined?

33. When are building permit, plan review and impact fees paid?

34. Do I schedule framing inspection before or after all rough plumbing/mechanical/electrical/fire alarm/fire sprinkler inspections are complete?

35. Can I request an inspection via fax?  

36. Can I install a wood burning fireplace in my home?  

37. Am I required to provide water storage for rural fire fighting?

38. What is required for Temporary Certificate of Occupancy (TCO)?

39. When is a permit required?  Why are permits required?

1. How many sets of plans do I submit? Commercial building permits, tenant finish permits and El Jebel area residential building permits require (3) set of building plans; Residential building permits in all areas of unincorporated Eagle County except El Jebel shall submit (2) sets of building plans.
Return to top

2. Must plan drawings be submitted on particular sized paper?   Yes, a minimum of 24" x 36" and a maximum of 30" x 40" dimensioned paper is required.  All drawings must be clearly legible, labeled and include a scale.   Drawings shall be clear for plans examiners, field inspectors and builders to interpret.   
Return to top
  
3.  Do plans require an architect/engineer wet stamp?  Residential footing/foundation/framing details must be wet stamped by a Colorado-licensed architect or engineer. Commercial building plan details require both a Colorado-licensed architect and engineer's wet stamp.   Non-ventilated roof systems also require wet stamped insulation assembly details by the project's Colorado-licensed architect or engineer of record.
Return to top

4. What codes are in effect? 2015 I-Codes and 2014 NEC as described in the Eagle County Building Resolution shall be enforced with building permits (and peripheral permits) receipted on or after January 1, 2017.   (Those projects receipted before January 1, 2017 will continue to be inspected under the prior 2009 I-Codes or as specified on the approved FIELD COPY of prints.)
Return to top

5. What is the equation for calculating snow loads in Eagle County?  Equation for calculating snow loads in Eagle County (from the Snow Load Design Data publication prepared by the Structural Engineers Association of Colorado amended 1990)
S= Design roof snow load in pounds per square foot
K=4 in all areas of Eagle County, except Tennessee Pass use 6              S=       32     (A-K/2)²
A=Altitude in thousands of feet (site elevation divided by 1000)                       K+12

Example:
The site elevation is 7500 ft, value of K is 4

7500 divided by 1000 = 7.5 - 2 = 5.5 x 5.5 = 30.25 x 2 = 60.5   (Round up to 61)
(The roof snow load for a 7500 ft elevation is 61 lbs. per sq. ft.)
Return to top

6. How do I determine the site-specific elevation of a building site? Various sources to determine elevation of a building site include: existing survey plat/map (part of property owner records), published quad or USGS maps, Google Earth and/or operation of a GPS at proposed building site.   Alternatively, call Eagle County GIS at 970-328-3551 or 970-328-3552.  Given the variations in lot size and certain topographic conditions, GIS staff can relay a range of elevations for a given parcel but cannot definitively identify your building site elevations via phone.  When calling the GIS Department, we recommend having your 12-digit tax parcel number available to reference.
Return to top

7. What is the wind design for Eagle County? 90 mph (3 second gust)
Return to top

8. What is the seismic zone for Eagle County? Zone C
Return to top

9. What is the frost depth in Eagle County? 48" or as otherwise specified by the geotechnical engineer's report
Return to top

10. What local amendments are in effect? Our locally adopted amendments are found in the Eagle County Building Resolution
Return to top

11. To whom should checks be made payable? "Eagle County Building Department"
Return to top

12. Where can I buy code books? Code books may be purchased by going to the website for the International Code Council at www.iccsafe.org.   Search "store." Alternatively, you may order code books through a local bookstore or other online sources. 
Return to top

13. Can I download code books from Eagle County's website?   No. While we write and publish our local amendments through the  Eagle County Building Resolution, the International Code Council holds copyrights to the I-Codes.  If you wish to view a section of code, you may visit Eagle County Building Division offices during regular business hours.  Some public library reference departments also have code books available to view.
Return to top

14. Can I apply for a permit online? Plumbing, mechanical, fireplace and electrical permits may be applied for online when you have a registered account through our Citizen Access Portal.   Building permits, fire sprinkler and fire alarm permits must be applied for in person or by mail.
Return to top

15. Can I submit an application through the mail?  Yes.  Send completed application to Eagle County Community Development, PO Box 179, 500 Broadway, Eagle CO 81631.
Return to top

16. Does unincorporated Eagle County have a use tax?  No use tax on construction materials need be included with your building permit application fees for unincorporated Eagle County.  (If you're inquiring about use taxes within incorporated towns, please call the town directly: Avon 970-748-4030; Basalt 970-927-4701; Eagle 970-328-6354; Gypsum 970-524-7688; Minturn 970-827-5645; Red Cliff 970-827-5303; Vail 970-479-2138.)
Return to top

17. Do you perform building inspections for incorporated towns in Eagle County?  No, the Eagle County Building Division inspects only unincorporated areas of Eagle County. Contact the incorporated towns for inspection scheduling: Avon 970-748-4030; Basalt 970-927-4701; Eagle 970-328-6354; Gypsum 970-524-7688; Minturn 970-827-5645; Red cliff 970-827-5303; Vail 970-479-2138.
Return to top

18. Do you process permit applications for the incorporated towns in Eagle County?  No, the Eagle County Building Division processes construction permits for only unincorporated areas of Eagle County. Contact the incorporated towns for permit applications: Avon 970-748-4030; Basalt 970-927-4701; Eagle 970-328-6354; Gypsum 970-524-7688; Minturn 970-827-5645; Red Cliff 970-827-5303; Vail 970-479-2138.
Return to top

19. Do I need to be registered or licensed with Eagle County? Owner builders and general contractors do not require registration or a license to build in unincorporated Eagle County. Plumbers must be licensed and registered as an active plumbing contractor with the State of Colorado.   Electricians must be licensed and registered as an active electrical contractor with the State of Colorado.  Architects and engineers must be licensed in the State of Colorado.  Septic installers must be licensed through Eagle County Environmental Health, for information call 970-328-8755.
Return to top

20. Who handles electrical inspections in El Jebel?  Electrical permits and inspections for the El Jebel / Missouri Heights/ Frying Pan areas are administered by the state electrical inspector, who can be reached toll free at 1-855-451-9795. For more information, go to: www.dora.state.co.us.   
Return to top

21. Do I need to pull a permit for an agricultural building?  Please refer to following information on agricultural buildings.
Return to top

22. What days do you inspect in El Jebel?  El Jebel office coverage for building inspections and individual appointments will be Mondays and Thursdays. Eagle County will continue with this two-day-a-week coverage until permit/inspection activity increases. If an emergency requires that inspections be made other than Monday or Thursday, call 970-328-8730. Staff will accommodate these requests on an individual basis. 
Return to top

23. What's my tax parcel number?  To obtain a 12-digit tax parcel number, see Planning Department FAQ or contact the Eagle County Assessor's Office at 970-328-8640 (have owner name, physical street address and/or legal description for property available).
Return to top

24. Who do I speak to about work being done without a permit?  Contact Todd Belback, Eagle County Code Enforcement Officer, at 970-328-8758.
Return to top

25. What's the zoning for my property?  To verify zoning for a particular property in unincorporated Eagle County, please see the  Planning Department FAQ or call 970-328-8730 and ask for the Planner On Duty.
Return to top

26. What's the allowable building height for my property?  If your building site is within a conventional zone district in unincorporated Eagle County, you can obtain allowable building height information by referencing Eagle County Land Use Regulations, Article 2-Definitions, Building Height and Article 3 Zone Districts Table 3-340 Schedule of Dimensional Limitations, Max. Height.   If your building site is located within a Planned Unit Development, please call 970-328-8730 and ask for the Planner On Duty. Please have the 12-digit tax parcel number, physical street address and/or legal description available.
Return to top

27. What number do I call to schedule inspections? 1-866-701-3307
Return to top

28. What's the routing cutoff time for requesting an inspection?  No later than 4 p.m. the previous business date.
Return to top

29. What's the allowable floor area ratio, lot coverage and impervious coverage for my property?  If your building site is within a conventional zone district in unincorporated Eagle County, you can obtain allowable floor area ratio, lot coverage and impervious cover by referencing Eagle County Land Use Regulations, Article 2-Definitions, Floor Area Ratio, Lot Coverage and Impervious Cover or Materials and Article 3 Zone Districts Table 3-340 Schedule of Dimensional Limitations, Maximum Lot Coverage, Impervious Materials and Maximum Floor Area Ratio.   If your building site is located within a Planned Unit Development, please call 970-328-8730 and ask for the Planner On Duty. Please have the 12-digit tax parcel number, physical street address and/or legal description available.
Return to top

30. What are your office hours? Eagle County Community Development front desk in Eagle is open 8 a.m. - 5 p.m. weekdays.  El Jebel Clerk & Recorders office  with adjacent Building Inspectors office, is also open 8 a.m. - 5 p.m. weekdays. El Jebel customers also reference question 22.
Return to top

31. What is the adopted code for building stairs?  Stairways in one- or two-dwelling or townhome residences classified as an R-3 occupancy, shall construct stairs complying with 2015 International Residential Code Section R.311.7 Stairways. Commercial buildings and all other multi-family R-2 and R-1 occupancy groups shall construct stairs complying with 2015 International Building Code Section 1011 Stairways and Chapter 11 Accessibility & ICC/ANSI A117.1.  The Stairway Manufacturers' Association also publishes helpful instruction guides at www.stairways.org.
Return to top

32. How is building permit valuation defined?  Generally speaking, the International Building Code describes "Permit valuations... to include total value of working, including materials and labor, for which the permit is being issued, such as electrical, gas, mechanical, plumbing equipment and permanent systems."  The Eagle County Building Resolution further amends Section 109.2 Building Permit Valuations as follows:  The valuation for building permits in Eagle County shall be based on the most recent cost figures per square foot as shown in the International Code Council Building Valuation Data Table published by International Code Council. The Eagle County Modifier is 1.4. The latest Building Valuation Table may be found at www.iccsafe.org (search "building valuation data") or at the Eagle County Community Development Office.  All valuations will be considered as good construction or the valuation provided by the applicant, whichever yields the higher.
Return to top

33. When are building permit, plan review and impact fees paid?  Building permit and plan review fees are paid at the time of building permit application submittal.  Effective February 8 2017 road impact fees and emergency service impact fees, are calculated courtesy of the Planning Department during permit intake and payment also made at submittal.  When applicable due to site conditions, a wildfire mitigation fee determination may be made during plan review and wildfire mitigation fee due upon issuance of the building permit (prior to release of the approved field copy of prints).
Return to top

34. Do I schedule framing inspection before or after all rough plumbing, mechanical, electrical, fire alarm or fire sprinkler inspections are complete? Rough-in inspections should occur before framing inspection to assure all cutting, notching or boring penetrations through structural framing are complete and any necessary strapping, nail, or shield plates have been installed.   Certain scopes of work may require a partial framing inspection (i.e. shear wall nailing etc.), if in doubt or need further clarification call 970-328-8730 and ask building staff for assistance.
Return to top

35. Can I request an inspection via fax?  Yes, by completing and returning the Inspection Request Fax Form
Return to top

36. Can I install a wood burning fireplace in my home?  Wood burning regulations for unincorporated Eagle County are found on the Environmental Health Department Outdoor Air Quality page.  Mechanical/Fireplace permit application forms are found on the Building Division's Permit page under Applications.  Local amendments that effect installation of wood burning stoves / fireplaces are found in the Eagle County Building Resolution (pay careful attention to: ECBR p.20, IRC amendment to section R1004.1 general and p. 54, TABLE 10).  Some neighborhoods restrict wood burning devices through enforcement of local covenants, check your local neighborhood association for requirements.  
Return to top

37. Am I required to provide water storage for rural fire fighting?  When constructing a new building or adding onto an existing building on parcels with no fire hydrant within 600 feet, one may be required to provide water storage per NFPA 1142 Water Supplies for Suburban and Rural Fire Fighting.   Proposed use, construction type, proximity to other buildings and the cubic footage of the proposed building are used to calculate the minimum required water storage, in gallons.  In some instances, structures with automatic sprinkler protection can reduce the amount of required water storage, in gallons. Calculations are, typically, performed by the building plans examiner during time of plan review.  Testing and final approval of said water storage systems falls under purview of the local fire district and is required prior to release of a TCO/CO of new buildings.
Return to top

38. What is required for Temporary Certificate of Occupancy (TCO)?  As published in the Eagle County Building Resolution, here are residential and commercial requirements for TCO temporary certificate of occupancy.  Also see plan reviewer notes and attachments included on the approved field copy.
Return to top

39. When is a permit required?  Why are permits required?  Please see the When is a Permit Required guide.
Return to top